Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements > Electrics & Lighting
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Electrics & Lighting All discussions related to bike electric, lights, bulbs, fuses and wiring.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-13, 19:39
Hamslay Hamslay is offline
Expert XT-Moto
 
Join Date: Jan 2013
Location: Bedfordshire
Posts: 173
Hamslay is on a distinguished road
What are these connectors under the seat?

I'm just having a fiddle around with my used XT that I got today, and looking under the seat I found a couple of connectors. Can anyone tell me what they are?

  #2  
Old 01-02-13, 20:50
Austin Austin is offline
Expert XT-Moto
 
Join Date: Oct 2011
Location: Garstang
Posts: 130
Austin is on a distinguished road
I have been wondering the same too. No idea and no guesses either.


Sent from my iPhone with a smile
  #3  
Old 01-02-13, 21:05
Pleiades Pleiades is offline
XT-Moto SuperStar
 
Join Date: Aug 2010
Location: North Norfolk
Posts: 5,320
Pleiades is on a distinguished road
They're for the Yamaha accessory alarm. One goes to the ECU and the other connects up to the indicator circuit if I recall.
Sponsored Links
  #4  
Old 01-02-13, 21:19
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,059
Kev is on a distinguished road
+1
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  #5  
Old 01-02-13, 22:03
Hamslay Hamslay is offline
Expert XT-Moto
 
Join Date: Jan 2013
Location: Bedfordshire
Posts: 173
Hamslay is on a distinguished road
Thanks chaps!!

  #6  
Old 04-02-13, 11:58
supamanaint supamanaint is offline
Expert XT-Moto
 
Join Date: Nov 2010
Location: Toowoomba QLD / The Hunter Valley NSW
Posts: 120
supamanaint is on a distinguished road
The attached pic shows the power wire that is switched on & off by the key, hope that helps.
Attached Images
File Type: jpg IMGP6818.JPG (168.5 KB, 173 views)
  #7  
Old 04-02-13, 15:27
DaleC DaleC is offline
Expert XT-Moto
 
Join Date: Aug 2012
Location: Innsbruck, Austria
Posts: 109
DaleC is on a distinguished road
Cheers Supamanaint!

I was seconds away from buying a test light or multimeter for the sole purpose of determining the correct plug - no longer required
  #8  
Old 04-02-13, 16:32
Hamslay Hamslay is offline
Expert XT-Moto
 
Join Date: Jan 2013
Location: Bedfordshire
Posts: 173
Hamslay is on a distinguished road
Thanks guys. Great stuff. So you get the 12v from the connector - does the neutral go back to the battery or what, if wiring grips? Or can one use another pin on the connector. Maybe I'll ask my local dealer tomorrow if the matching connector is available and try to wire the whole thing up.

I must get a workshop manual...
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 20:33.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top