Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > General Help Section > General & Appearance Mods
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

General & Appearance Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc

Reply
 
Thread Tools Display Modes
  #1  
Old 22-06-10, 13:23
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
Bjerrang`s tail tidy

Ive decided to rebuild the tail on my xtx.
Since the kit from off road de is quite expensive ive tried to make one myself.
LED brake light and indicatos from Biltema.

This is what i had to remove , fairly easy.
Attached Images
File Type: jpg Bilde0008.jpg (50.1 KB, 266 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|

Last edited by bjerrang; 22-06-10 at 13:55.
  #2  
Old 22-06-10, 13:27
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
First i had to cut in the plastic , this is the large piece that is the baggacomparment and brake light housing
Attached Images
File Type: jpg Bilde0005.jpg (47.5 KB, 211 views)
File Type: jpg Bilde0007.jpg (46.4 KB, 193 views)
File Type: jpg Bilde0006.jpg (26.3 KB, 199 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|
Sponsored Links
  #3  
Old 22-06-10, 13:28
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
Next i tried to make som mockups in aluminium , but ive found out that it took to long time to adjust and alot of work so i did it in paper.
Attached Images
File Type: jpg Bilde0004.jpg (46.7 KB, 199 views)
File Type: jpg Bilde0003.jpg (40.0 KB, 174 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|
  #4  
Old 22-06-10, 13:31
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
Now i had to make it in alu, and painted it black.
I had to make it quite long since the norwegian license plate it quite big, this came with a side effect.
Now i also had to make som kind of support to the plate to prevent vibrations
Attached Images
File Type: jpg Bilde0016.jpg (44.1 KB, 138 views)
File Type: jpg Bilde0017.jpg (49.4 KB, 136 views)
File Type: jpg Bilde0015.jpg (49.6 KB, 186 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|
  #5  
Old 22-06-10, 13:37
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
Here is the second plate that holds the led lightning. How is riveted to the large plate. The second image shows the oem harness to the brake light , since it has a plug i decided to use this. Wires were cut close to the lamp holder.
Attached Images
File Type: jpg Bilde0013.jpg (37.3 KB, 151 views)
File Type: jpg Bilde0014.jpg (38.0 KB, 164 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|
  #6  
Old 22-06-10, 13:39
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
First install. Again since the licensplate is so big i had to dublesided tape as you can see here, to prevent it from vibrating. Here you can cleary see the stiffners. I used the original bolts and indicator assy attachment holes for these.
Attached Images
File Type: jpg Bilde0018.jpg (56.5 KB, 180 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|

Last edited by bjerrang; 22-06-10 at 13:57.
  #7  
Old 22-06-10, 13:46
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
Here its done, remember to use led resistors as you connect in paralelle to the indicators one for each side, to prevent rapid flashing.
I also did the AIS blockage at the same time with a AN6-5A bolt that i grinded round as kev instructions.
Photos is taken with a celluar phone, sorry for that.
Attached Images
File Type: jpg Bilde0019.jpg (47.9 KB, 175 views)
File Type: jpg Bilde0020.jpg (48.0 KB, 156 views)
File Type: jpg Bilde0021.jpg (46.6 KB, 184 views)
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|
  #8  
Old 22-06-10, 17:03
ryadiver ryadiver is offline
Newbie XT-Moto
 
Join Date: Apr 2010
Location: Tromsø
Posts: 2
ryadiver is on a distinguished road
nice

Hva kosta delene fra biltema? hva kjøpte du av deler? hvilken type motstand brukte du til led lyktene?


frode
  #9  
Old 22-06-10, 22:29
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,058
Kev is on a distinguished road
Looks good mate, nice work.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  #10  
Old 23-06-10, 07:28
bjerrang bjerrang is offline
Expert XT-Moto
 
Join Date: Jul 2008
Location: Tromso , Norway
Posts: 62
bjerrang is on a distinguished road
Quote:
Originally Posted by ryadiver View Post
nice

Hva kosta delene fra biltema? hva kjøpte du av deler? hvilken type motstand brukte du til led lyktene?


frode
www.biltema.no

1ea 82357 brake light 119,00nok
1ea 82339 indicator Sort 219,00
2ea 42202 resistor 39,90

There is a scandinavian part of this forum...
__________________
My mods. |DNA1&2|snorkel removed|CCC w/baffels removed|Tail Tidy|AIS blocked|RapidBike3|
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 19:39.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top