Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements
Register FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Performance Modifications & Enhancements Engine, Fuelling & Throttle performance mods

Reply
 
Thread Tools Display Modes
  #41  
Old 05-08-16, 22:56
maxwell123455 maxwell123455 is offline
XT-Moto SuperStar
 
Join Date: Jul 2007
Location: Edinburgh, Scotland
Posts: 1,958
maxwell123455 is on a distinguished road
Problem about even getting into the diagnostic mode is I hold the select and reset buttons, turn the key on and after about 5-6 seconds it just changes the time. the select button seems to work on its own but will not work when its combined with the reset button

any body had this issue before?

trying to test if the fan is working as my bike seems to be running very hot and ive found the radiator cap is leaking but not sure the fan is working.
__________________
Plough on
  #42  
Old 06-08-16, 09:05
DirkZ's Avatar
DirkZ DirkZ is offline
Expert XT-Moto

 
Join Date: Mar 2015
Location: Gold Coast, Australia
Posts: 159
DirkZ is on a distinguished road
If you have an XT660Z you can not go into Diagnostic mode via the dashboard (as explained on the previous page of this thread).
You need to get the Yamaha F1 Diagnostic Tool which can be bought off eBay
__________________
2014 XT660Z - Barrett pipe, DNA stage1.5, Barkbuster hand guards and handlebars, Pivot pegs, Teknik suspension, Guard-it engine protector combo, B&B rear rack, Trax topbox.
  #43  
Old 13-01-17, 16:13
CrozOver CrozOver is offline
Newbie XT-Moto
 
Join Date: Sep 2016
Location: Sweden
Posts: 7
CrozOver is on a distinguished road
Error Number 22 : Air intake temperature sensor error - DIAG mode 05

What should i do?
  #44  
Old 13-01-17, 18:15
Pleiades's Avatar
Pleiades Pleiades is offline
Moderator

 
Join Date: Aug 2010
Location: North Norfolk
Posts: 5,344
Pleiades is on a distinguished road
Quote:
Originally Posted by CrozOver View Post
Error Number 22 : Air intake temperature sensor error - DIAG mode 05

What should i do?
D05 just shows the actual AIT reading (what the ECU is seeing/reading) on the dash (X/R) or diagnostic tool (Z). The idea is you use a thermometer to measure ambient temperature close to the intake, or even better the temperature actually inside the airbox (you'll need a digital thermometer with a probe to do this), then compare the two readings. The reading in D05 should be within a few degrees of that on your thermometer. If they're wildly different, then you've got an issue needing further investigation.
  #45  
Old 08-10-18, 22:48
profesionalas profesionalas is offline
Newbie XT-Moto
 
Join Date: Oct 2018
Location: Lithuania
Posts: 2
profesionalas is on a distinguished road
Quote:
Originally Posted by pommie View Post
i did notice in sensors test 09 : Battery voltage - must be above 12.0 mine is reading 0
alex
When you testing 09 you must turn on red button (Kill Switch) then it will show voltage readings.
  #46  
Old 24-11-18, 16:41
Adamk Adamk is offline
Newbie XT-Moto

 
Join Date: Aug 2018
Location: Carrickfergus, Northern Ireland
Posts: 3
Adamk is on a distinguished road
Can anyone shed a little light on a error 03 and flashing coolant light? Struggling to find a definitive answer. Appreciate any help. Thanks Adam.
Sponsored Links
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:57.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top