Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements > Engine & Gearbox
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Reply
 
Thread Tools Display Modes
  #51  
Old 27-10-10, 08:57
zaburtante zaburtante is offline
Expert XT-Moto
 
Join Date: Jun 2009
Location: Istanbul
Posts: 73
zaburtante is on a distinguished road
Quote:
Originally Posted by Kev View Post
I know that I see and read all differents
Just I want to see tecnical differents between oem with Stg2 cam,
then I ask before degrees.
For example I know Stg 2 cam exhaust duration is 243 degree oem cam 260 degree..
__________________
Ported Head / 0,25 mm Thin head gasket / +2 TB / Stg 2 Hotcam / K&N Filter /Brisk Colder Spark Plug / DNA Stg2 Filter / 35 mm fork Spacers / 15 W fork oil / Fork Lowered 20 mm/ Ais Blocked / re-route engine breather / 44T Rear Sprocked / Carbonium Rear break hose / Crd 40mm exhaust pipe / rear spring two click stiffer / Home made Fork & Swingarm Protectors./ Front fork stabilizer (OTR)
  #52  
Old 27-10-10, 11:08
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,059
Kev is on a distinguished road
I have not degreed the standard XT660 cam. The dyno results speak for them selves, you can see where the torque & HP is delivered with before & after runs.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Sponsored Links
  #53  
Old 28-10-10, 10:07
zaburtante zaburtante is offline
Expert XT-Moto
 
Join Date: Jun 2009
Location: Istanbul
Posts: 73
zaburtante is on a distinguished road
Quote:
Originally Posted by Kev View Post
I have not degreed the standard XT660 cam. The dyno results speak for them selves, you can see where the torque & HP is delivered with before & after runs.
Yes I see them. yamaha gives standard degrees in service manual
__________________
Ported Head / 0,25 mm Thin head gasket / +2 TB / Stg 2 Hotcam / K&N Filter /Brisk Colder Spark Plug / DNA Stg2 Filter / 35 mm fork Spacers / 15 W fork oil / Fork Lowered 20 mm/ Ais Blocked / re-route engine breather / 44T Rear Sprocked / Carbonium Rear break hose / Crd 40mm exhaust pipe / rear spring two click stiffer / Home made Fork & Swingarm Protectors./ Front fork stabilizer (OTR)
  #54  
Old 28-10-10, 22:16
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,059
Kev is on a distinguished road
Quote:
Originally Posted by zaburtante View Post
Yes I see them. yamaha gives standard degrees in service manual
Yes I am aware of the Yamaha spec, but they do not state at what lift they measured the degrees at so it is hard to compare the standard cam against other cams.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  #55  
Old 29-10-10, 09:07
zaburtante zaburtante is offline
Expert XT-Moto
 
Join Date: Jun 2009
Location: Istanbul
Posts: 73
zaburtante is on a distinguished road
Quote:
Originally Posted by Kev View Post
Yes I am aware of the Yamaha spec, but they do not state at what lift they measured the degrees at so it is hard to compare the standard cam against other cams.
what ever mate I was just wonder how is timing what is the difference, how its work.Because I see power diagrams of standard and stg2 cam..you know
just wondering. thank you for all information.. If I have a time a day I will check the stg2 timing with degree wheel and share here
__________________
Ported Head / 0,25 mm Thin head gasket / +2 TB / Stg 2 Hotcam / K&N Filter /Brisk Colder Spark Plug / DNA Stg2 Filter / 35 mm fork Spacers / 15 W fork oil / Fork Lowered 20 mm/ Ais Blocked / re-route engine breather / 44T Rear Sprocked / Carbonium Rear break hose / Crd 40mm exhaust pipe / rear spring two click stiffer / Home made Fork & Swingarm Protectors./ Front fork stabilizer (OTR)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:16.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top